-大.jpg)
P3008W-AC can be installed on a pole or on a wall, which is convenient for installation and maintenance. The equipment adopts the industry's advanced technology, provides customers with efficient GPON solutions, Supports mixed networking of different types of ONUs, which can save a lot of costs。
.jpg)
Built-in EDFA+WDM module (optional)
The optical amplifier uses the well-known high-performance erbium-yterbium co-doped double-clad fiber and low-noise pump laser. It has reliable circuit design and efficient heat dissipation design. The maximum total output power of the whole machine can reach+37dBm, supporting up to 16 outputs, including optical switch, CWDM and RF detection. It is applicable to the amplification and transmission of 1550nm optical signal in the downstream of FTTH network.
EDFA uses modular and erbium-doped fiber amplification technology. Support laser switch function and output optical power automatic power control (APC) function. The output optical power is ≥ 20dB, and the output power of the optical amplifier can be adjusted, which can float down 0-3dB, as the system power reserve. It is continuously adjustable at 0.1dBm step interval within 0-3dBm. For detailed configuration, please refer to EDFA manual 《Field type optical amplifier EDFA.docx》.
The field EDFA has the following characteristics:
*- 3~+10dBm wide input range.
*The maximum output total power is 20dBm, with 8-port output.
*Excellent noise coefficient and nonlinear index.
*The keys on the internal display screen provide parameter reference and setting
*Cast aluminum waterproof shell, IP67 protection grade, excellent heat dissipation performance.
*The switch power supply with high reliability can adapt to the harsh outdoor environment.
EDFA+WDM
Note: The optical signal of the downstream network is amplified and transmitted in the FTTX network. One channel of input CATV 1550nm signal, eight channels of input OLT PON 1490nm signal, and eight channels of output combined optical signal ports are connected to the user terminal ONU through the ODN network respectively.
Product specifications
|
Attributes |
P3008W-AC |
|
Exchange capacity |
104Gbps |
|
Packet forwarding rate |
77.376Mpps |
|
Memory and storage |
memory：2GB, storage：8GB |
|
Management port |
Console， MGMT |
|
Port |
8*GPON Port，1*10/100/1000M Base-T,4*1000M Base-X SFP/4*10GE SFP+ |
|
PON |
Comply with ITU-TG.984/G.988 standard 20KM Physical differential distance，60KM transmission logical distance 1:128 Max splitting ratio Standard OMCI management function Open to any brand of ONT ONU batch software upgrade |
|
VLAN |
Support 4K VLAN Support Vlan based on port, MAC and protocol Support dual Tag VLAN, port-based static QinQ and fiexible QinQ |
|
MAC |
16K Mac address Support static MAC address setting Support black hole MAC address filtering Support port MAC address limit |
|
ring network protocol |
Support STP/RSTP/MSTP Support ERPS Ethernet ring network protection protocol Support Loopback-detection port loopback detection |
|
port control |
Support two-way bandwidth control Support port storm suppression Support 9K Jumbo ultra-long frame forwarding |
|
Port aggregation |
Support static link aggregation Support dynamic LACP Each aggregation group supports a maximum of 8 ports |
|
Mirroring |
Support port mirroring Support stream mirroring |
|
ACL |
Support standard and extended ACL Support ACL policy based on time period Provide flow classification and flow definition based on IP header information such as source/destination MAC address, VLAN, 802.1p, ToS, DSCP, source/destination IP address, L4 port number, protocol type, etc. |
|
QoS |
Support flow rate limiting function based on custom business flow Supports mirroring and redirection functions based on custom business flows Support priority marking based on custom service flow, support 802.1P, DSCP priority Remark capability Support port-based priority scheduling function, support queue scheduling algorithms such as SP/WRR/SP+WRR |
|
Safety |
Support user hierarchical management and password protection Support IEEE 802.1X authentication Support Radius&TACACS+ authentication Support MAC address learning limit, support black hole MAC function Support port isolation Support broadcast message rate suppression Support IP Source Guard Support ARP flood suppression and ARP spoofing protection Support DOS attack and virus attack protection |
|
Layer 3 |
Support ARP learning and aging Support static route Support dynamic route RIP/OSPF/BGP/ISIS Support VRRP |
|
System management |
CLI、Telnet、WEB、SNMP V1/V2/V3、SSH2.0 Support FTP,TFTP file upload and downdload Support RMON Support SNTP Support system work log Support LLDP neighbor device discovery protocol Support 802.3ah Ethernet OAM Support RFC 3164 Syslog Support Ping and Traceroute |
|
Environmenttemperature |
Working Temperature：-20℃～55℃ Storge temperature：-40℃～70℃ |
|
environment humidity |
Operating humidity: 10%～95% (non-condensing) Storage humidity: 10%～95% (non-condensing) |
|
environment friendly |
China RoHs,、EEE |
|
weight |
≤9.5kg |
|
fan |
Fixed fans（three fans） |
|
power |
AC： 100～240V 47/63Hz； |
|
Power consumption |
65W |
|
Dimensions (Width * height * depth) |
370x295x152mm |
Technical parameters of EDFA+WDM module
Purchasing Information
